Make the best of your roller
Before the coming season, spend some time looking at your roller to optimise its performance.
First of all, look at the wear, a ring with less than 50% of its original pattern will have less soil preparation ability as well as grip. Now check if the wide rings can be moved against each other, if this is the case you need to place new washers on the axle. Moving rings will underperform and wear unnecessary.
Break, crush and roll - with our roller rings
There are several reasons to ensure that the roller rings are not overly worn for the upcoming season. With less distinct pattern on the big rings the forward drive in the roller package is reduced at the same time as the depth impact is lessened. The thin rings on the Cambridge packer are responsible for much of the creation of fine tilth, this is reduced proportionally as the teeth are worn down. The same thing is true for the Crosskill rings whose work to create a seedbed is strongly correlated with its ability to crush the clods after the plough.
- Guaranteed fit for your machine
- Highest quality steel – longer lifetime
- Controlled process and materials – always same high quality
- Excellent paint – less rust
- Crosskill roller rings lasts up 20 times longer than before
166 € rrp
Crosskill roller ring Reinforced Crosskill rings. Width 108mm. Ø 520mm. Art. No: 238376.
142 € rrp
Crosskill roller ring Reinforced Crosskill rings. Ø 470mm. Art. No: 229722.
153 € rrp
Crosskill roller ring Reinforced Crosskill rings. Width 92mm. Ø 520mm. Art. No: 222391.
59,9 € rrp
Cambridge roller ring Narrow. Ø 485mm. Art. No: 301012.
115 € rrp
Cambridge roller ring Wide. Ø 472mm. Art. No: 301002.
195 € rrp
Cambridge HeavyDuty roller ring. Wide. Ø 550mm. 5 year warranty. Art. No: 101080.
82,5 € rrp
Cambridge HeavyDuty roller ring Narrow. Ø 565mm. 5 year warranty. Art. No: 101081.
Good to know!
Why spring washers?
Spring washers, which are mounted at the ends of the roller ring, absorb the pressure and help the roller to operate more smoothly. The washers also minimise wear on the roller rings. By pressing the rings together the forces are taken up by the ring package instead of the axle, this doubles the axle strength. When changing the roller rings, it is often necessary to add more spring washers, or to replace the existing ones.
Note! After each season, check that the wide rings (not the breaker rings) do not move mutually. If this is the case, more spring tension plates no. 401444 should be mounted..
Spring washer 112x57x3mm. Art. No: 401444.
