“Carrier by Väderstad: Paving the way for precision cultivation, cultivating success from the ground up“
Accessories Carrier
Balance weights
- Increases weight for more aggressive penetration
- Easily fastened on the frame with clamps
Following harrow
- 12mm diameter tines on 12,5cm distance
- Angle can be adjusted
- Optimised levelling after packer
- Creates more fine tilth and leaves residues on top
- Increased seedbed preparation capability
- Available for all packers including trailed version
Note! The follow harrow is not available in combination with BioDrill 180-250.
BioDrill
BioDrill BDX 180 litre for 3.0 and 3.5m BioDrill BDX 250 litre for 4.0m
- BioDrill BDX 180-250 can establish small seeds with precision down to a rate of 1.5kg/ha.
- Electrical metering system operated with ControlStation
- The driving speed is measured with ground radar, controlling the precision of the electrical metering system.
- BDX is equipped with agitator for an even distribution all over the working width
“This is a really good idea“
Accessories Carrier XT 425-625
Cylinder protection
- Ensures that the cylinders remain undamaged when using CrossCutter Disc
“This is a really good idea“
Accessories Carrier 420-1225
Straw harrow
- Two rows of 12mm tines mounted ahead of discs
- Adjustable with crank handles
- Distributes straw in the same pass as the cultivation
- Well distributed straw is crucial to provide the following crop with the same conditions over the entire field
CrossCutter Knife
- Hydraulically operated knife roller mounted ahead of discs
- Increases the cultivation intensity and the speed of decomposition
- Open design prevents fill up with residues
- Short segments optimises soil contact
- Rubber suspension prevents damaging vibrations in main frame
- Turnable knifes reduces costs
Note! CrossCutter Knife is not available for Carrier 420 and Carrier 820
Hydraulic front tool adjustment
- Simplifies the depth setting of Carrier further by aligning the wings to the middle section
Side plates
- Working depth adjustable on outer disc
- Increase working width 25cm
- Improved levelling
Support wheel
- Bolted solution
- Prevents problems with jumping
- Support wheel is normally mounted forward
- On Carrier 500 it is possible to fold the support wheels backwards for tractors with dual tyres or Carrier with straw harrow or CrossCutter knife
* Not in combination with kit for Side plates.
Pending scarpers
- Increases the moisture management capabilities of the scrapers while offering a quiet operation.
BioDrill
Allows drilling of small seeds placed in front of packer at the same time as rolling soil preparation
- High precision down to 1kg/ha
- Electric operated metering with radar speed signal
- Precision spreader plate uneffected by wind or speed
“This is a really good idea“
Accessories Carrier XL 425-625
Linkage drawbar
- Linkage drawbar Cat. 3 for machines equipped with hitch drawbar
Straw harrow
- Two rows of 12mm tines mounted ahead of discs
- Adjustable with crank handles
- Distributes straw in the same pass as the cultivation
- Well distributed straw is crucial to provide the following crop with the same conditions over the entire field
BioDrill
- Allows seeding of small seeds placed in front of packer at the same time as rolling soil preparation
- High precision metering down to 1kg/ha
- Electric Fenix II metering with radar speed signal operated with ControlStation
- Precision spreader plate uneffected by wind or speed
CrossCutter Knife
- Hydraulically operated knife roller mounted ahead of discs
- Increases the cultivation intensity and the speed of decomposition
- Open design prevents fill up with residues
- Short segments optimises soil contact
- Rubber suspension prevents damaging vibrations in main frame
- Turnable knifes reduces costs
CrossBoard Heavy
CrossBoard tines connected with a double acting stabilizer bar making the tines working as one unit instead of independent.
- Effectively mills and levels
“This is a really good idea“
Accessories Carrier XL 925-1225
BioDrill
- Allows drilling of small seeds placed in front of packer at the same time as rolling soil preparation
- High precision down to 1kg/ha
- Electric operated metering with radar speed signal
- Precision spreader plate uneffected by wind or speed
